Upload Tcx Files to Ride With Gps (Hangs

Very often, people lose part of their ride because the GPS shuts off. If y'all are the type of person who likes to have every detail of a ride, this tutorial is for you. It takes near fifteen-45 minutes to get this washed correctly, and can be a chip of a challenge. If this looks too hard, send me your files and I can practise it for you - but I'll probably ask you to donate!

Step i: Upload your ride to the tools. Nosotros just desire to see the time stamps for now.

Uploading your file to the GOTOES | Strava Tools

Step ii: Once your file is uploaded, click the button that says "Click Here" and get to the next page. On this 2nd page, click the "Edit Points" button.

Click The EDIT POINTS Push

Step 3: Identify the region where nosotros have missing GPS information.

Identify the region of missing data

Step 4: Click on the map right next to where the straight line begins. We are trying to find the time stamp where the line went bad.

Click on the betoken where the line starts to get bad.

Step v: Write down the time stamps. In this instance, we would write down 10:17:43 and 10:57:31. Our job is to now create the missing segment, and have it begin at 2021-03-13 10:17:43..... and finish soon earlier 2021-03-13 x:57:31.

Accept a note of the time stamps.

Step 6: At this point, you can close that window. We won't demand it anymore. Adjacent, go to Strava and find the Road Architect. Y'all tin can use whatever program that draws GPX files, just in my example, I am going to use Strava.

Begin to Re-Draw your route.

Stride 7: Draw your route. Be sure to have the start and finish points be as close as possible to the actual points where your activity went wrong. Your goal is to fill in the missing piece every bit exactly as possible. Note that you can make Modest adjustments afterwards using that Edit points tool you lot used in the before steps. The reason you cannot make major changes is considering the time stamps cannot be adjusted - pregnant that you lot may have a short burst of un-realistic speed if you move points too far apart.

Carefully Redraw the missing section of your activity here.

Pace 8: Export the GPX file.

Export the GPX file from your missing piece of GPX track.

Pace ix: Take note of the distance of your missing piece. Yous will need to practise some math in the side by side step! Notice how this distance is 6.07 miles.

Accept notation of the distance.

Screen Shot 2021-03-15 at 8.29.56 AM.png (44.82 KiB) Viewed 7229 times

Pace x:

Become out your thinking cap. In step 5 we took note of the fourth dimension. And then, the duration of the missing chunk is x:57:31 minus 10:17:43. That is just nigh 40 minutes elapsing. We know twoscore minutes is 2/3 of an 60 minutes, so we will say that this is about 0.66 hours. In step 9, nosotros got the altitude (6.07 miles). Then, if Charge per unit = Distance / Time, we simply take 6.07 divided by 0.66 hours... so virtually nine.19 miles per hour. I try to err on the side of caution when making fake-data (so nosotros don't get KOMs)... but at the same time, we don't want the duration of the segment to exceed the gap we are trying to fill!

Step 11:

• Get to the "Add Time Stamps" Tool on my page.

• Upload your MissingPiece file.

• Set the Time Zone to "UTC" (this is considering all GPS files use UTC within their time stamps).

• Enter the start time from step 5 (ten:17:43 on March 13, 2021)

• Enter the desired Average Speed. We decided on 9mph above... be Bourgeois!

• Select the appropriate speed type - bike or run.

• Click the Upload Push button.

Fill out all the information.

Step 12: Check the beginning and stop times - make certain that they lucifer the gap you are trying to fill.

Chek your get-go and terminate time for the GPS Gap you lot are trying to make full.

Step thirteen: If all looks good, Export this file onto your desktop. Practise Not select the Send to Strava Option.

Consign, but do NOT send to Strava.

Step 14: Go to the Merge Tool and upload the file you just created along with the original file with the missing chunk.

Upload your two pieces. Switch from UTC to "Let Tool Judge My Fourth dimension Zone" (or yous can select your fourth dimension zone if you know it).

Step 15: Click the "Click Here" button one time information technology is uploaded. On the next page, you will see your new slice overlapping with your original track. Let's have the tool re-calc the distance, and we volition double bank check everything by clicking "Edit Points" (that way we tin run into it on a map before we transport to Strava.

Concluding steps getting fix to upload to Strava.

Footstep 16: It is fixed!

Double checking to make sure it all looks OK.

Step 17: Send to Strava from the tool!

Ship To Strava!

garciathemeavoking.blogspot.com

Source: https://gotoes.org/stravatoolsforum/viewtopic.php?t=79

Share this post